Selected publications for R. O. Ritchie (1999-2001)
-
R. O. Ritchie, "Aspects of Fatigue-Crack Growth in Intermetallic
Alloys", Transactions of the Nonferrous Metals Society of China,vol.
9, Suppl. 1, June 1999, pp. 214-227.
-
R. O. Ritchie, B. L. Boyce, J. P. Campbell, O. Roder, A.
W. Thompson, and W. W. Milligan, "Thresholds for High-Cycle Fatigue in
a Turbine Engine Ti-6Al-4V Alloy", International Journal of Fatigue,
vol. 21 (7), 1999, pp. 653-662.
-
S. A. Padula, II, A. Shyam, R. O. Ritchie, and W. W. Milligan,
"High Frequency Fatigue Crack Propagation Behavior of a Nickel-Base Turbine
Disk Alloy", International Journal of Fatigue, vol. 21 (7), 1999,
pp. 725-731.
-
T. L. Becker, R. M. Cannon, and R. O. Ritchie, "A Statistical
RKR Fracture Model for the Brittle Fracture of Functionally Graded Materials",
Materials
Science Forum, vol. 308-311, 1999, pp. 957-962.
-
C. J. Gilbert, V. Schroeder, and R. O. Ritchie, "Mechanisms
for Fracture and Fatigue-Crack Propagation in a Bulk Metallic Glass," Metallurgical
and Materials Transactions A, vol. 30A (8), July 1999, pp. 1739-1753.
-
R. O. Ritchie, D. L. Davidson, B. L. Boyce, J. P. Campbell,
and O. Roder, "High-Cycle Fatigue of Ti-6Al-4V", Fatigue & Fracture
of Engineering Materials & Structures, vol. 22, July 1999, pp.
621-631.
-
B. L. Boyce, J. P. Campbell, and O. Roder, A. W. Thompson,
and R. O. Ritchie,, "Aspects of High-Cycle Fatigue Performance in a Ti-6Al-4V
Alloy", in Fatigue Behavior of Titanium Alloys, R. R. Boyer, D.
Eylon, and G. Lütjering, eds., TMS, Warrendale, 1999, pp. 3-13.
-
J. J. Kruzic, J. P. Campbell, and R. O. Ritchie, "Fatigue-Crack
Propagation in Gamma-Based Titanium Aluminide Alloys at Large and Small
Crack Sizes", in High Temperature Ordered Intermetallic Alloys VIII,
E.P.George, M.J.Mills, and M.Yamaguchi, eds., MRS Symposium Proceedings,
vol. 552, Materials Research Society, Pittsburgh, PA, 1999, pp. 1-6.
-
C. J. Gilbert, J. W. Ager, III, V. Schroeder, and R. O. Ritchie,
"Mechanism for Light Emission during Fracture of a Zr-Ti-Ni-Cu-Be Bulk
Metallic Glass: Temperature Measurements in Air and Nitrogen", in Bulk
Metallic Glasses, W. L. Johnson, A. Inoue, and C. T. Liu, eds., MRS
Symposium Proceedings, vol. 554, Materials Research Society, Pittsburgh,
PA, 1999, pp. 191-196.
-
C. J. Gilbert, V. Schroeder, and R. O. Ritchie, "Fracture
and Fatigue in a Zr-Based Bulk Metallic Glass", in Bulk Metallic Glasses,
W. L. Johnson, A. Inoue, and C. T. Liu, eds., MRS Symposium Proceedings,
vol. 554, Materials Research Society, Pittsburgh, PA, 1999, pp. 343-354.
-
A. L. McKelvey and R. O. Ritchie, "Fatigue-Crack Growth in
the Superelastic Endovascular Stent Material Nitinol", in Tissue Engineering,
E. Chen, C. Laurencin, M. Marcolongo, and G. Picciolo, eds., MRS Symposium
Proceedings, vol. 550, Materials Research Society, Pittsburgh, PA,
1999.
-
J. M. McNaney, C. J. Gilbert, and R. O. Ritchie, "Effect
of Viscous Grain Bridging on Cyclic Fatigue-Crack Growth in Monolithic
Ceramics at Elevated Temperatures", Acta Materialia, vol. 47 (9),
July 1999, pp. 2809-2819.
-
A. L. McKelvey and R. O. Ritchie, "Fatigue-Crack Propagation
in Nitinol, a Shape-Memory and Superelastic Endovascular Stent Material",
Journal
of Biomedical Materials Research, vol. 47, Dec., 1999, pp. 301-308.
-
L. Gordon, F. A. Dysarz, K. T. Venkateswara Rao, A. Mok,
R. O. Ritchie, and S. Rabinowitz: "Flexor Tendon Repair using a Stainless
Steel External Splint: Biomechanical Study on Human Cadaver Tendons," Journal
of Hand Surgery (British and European Volume), 1999, vol.24B (6), pp.
654-657.
-
V. Schroeder, C. J. Gilbert, and R. O. Ritchie, "Effect of
Aqueous Environment on Fatigue-Crack Propagation Behavior in a Zr-Based
Bulk Amorphous Metal", Scripta Materialia, vol. 49 (9), April 1999,
pp. 1057-1061.
-
R. O. Ritchie, "Small-Crack Growth and the Fatigue of Traditional
and Advanced Materials", in Fatigue '99, Proceedings of the Seventh
International Fatigue Congress, X.-R. Wu and Z. G. Wang, eds., Higher
Education Press, Beijing, China/EMAS, Warley, U.K., vol. 1, 1999, pp. 1-14.
-
R. O. Ritchie, "The Importance of Small Crack Effects in
the Microstructural Development of Advanced Materials", in Small Fatigue
Cracks: Mechanics, Mechanisms and Applications, K. S. Ravichandran,
R. O. Ritchie, and Y. Murakami, eds., Elsevier, Oxford, U.K. 1999, pp.
233-246.
-
C. J. Gilbert, Y. S. Han, D. K. Kim, and R. O. Ritchie, "Small
Crack Effects in Ceramic Materials", in Small Fatigue Cracks: Mechanics,
Mechanisms and Applications, K. S. Ravichandran, R. O. Ritchie, and
Y. Murakami, eds., Elsevier, Oxford, U.K. 1999, p. 283-288.
-
C. J. Gilbert, V. Schroeder, and R. O. Ritchie, "Fracture
and Fatigue of Amorphous Metals", in Progress in Mechanical Behaviour
of Materials – ICM-8, Proceedings of the Eighth International Conference
on the Mechanical Behaviour of Materials, F. Ellyin and J. W. Provan,
eds., Pergamon Press, Oxford, U.K., Vol. I, 1999, pp. 14-18.
-
J. J. Kruzic, J. P. Campbell, A. L. McKelvey, H. Choe, and
R. O. Ritchie, "The Contrasting Role of Microstructure in Influencing Fracture
and Fatigue-Crack Growth in g-Based Titanium
Aluminides at Large and Small Crack Sizes", in Gamma Titanium Aluminides
1999, Y.-W. Kim, D. M. Dimiduk, and M. H. Loretto, eds., TMS, Warrendale,
PA, 1999, pp. 495-507.
-
J. P. Campbell and R. O. Ritchie, "Mixed-Mode Fatigue-Crack
Growth Thresholds in Bimodal Ti-6Al-4V", Scripta Materialia, vol.
41 (10), Oct. 1999, pp. 1067-1071.
-
R. O. Ritchie, C. J. Gilbert, and V. Schroeder, "Fracture
and Fatigue Behavior in Advanced Materials: Bulk Metallics Glasses", in
Proceedings
of the International Conference on Advanced Technology in Experimental
Mechanics (ATEM’99), The Japanese Society of Mechanical Engineers,
Shinjuku-ku, Tokyo, Japan, vol. 1, 1999, pp. 9-16.
-
R. O. Ritchie, "Mechanisms of Fatigue-Crack Propagation in
Ductile and Brittle Solids", International Journal of Fracture,
vol. 100 (1), 1999, 55-83.
-
R. O. Ritchie, C. J. Gilbert, and J. M. McNaney, "Mechanics
and Mechanisms of Fatigue Damage and Crack Growth in Advanced Materials",
International
Journal of Solids and Structures, vol. 37 (1-2), Jan. 2000, pp. 311-329.
-
A. L. McKelvey and R. O. Ritchie, "On the Temperature Dependence
of the Superelastic Strength and the Prediction of the Theoretical Uniaxial
Transformation Strain in Nitinol, Philosophical Magazine, vol. 80
(8), 2000, pp. 1759-1768.
-
T. L. Becker, R. M. Cannon, and R. O. Ritchie, "An Approximate
Method for Residual Stress Calculation in Functionally Graded Materials",
Mechanics
of Materials, vol. 32 (2), Feb. 2000, pp. 85-97.
-
C. J. Gilbert, Y. S. Han, D. K. Kim, and R. O. Ritchie, "Anomalous
Cyclic Fatigue-Crack Propagation Behavior of Small Cracks in Monolithic
Grain-Bridging Ceramics," Ceramics International, vol. 26, 2000,
pp. 721-725.
-
C. J. Gilbert, D. R. Bloyer, M. W. Barsoum, T. El-Raghy,
A. P. Tomsia, and R. O. Ritchie, "Fatigue-Crack Growth and Fracture Properties
of Course- and Fine-Grained Ti3SiC2 Ceramic", Scripta
Materialia, vol. 42 (8), April 2000, pp. 761-767.
-
R. O. Ritchie, V. Schroeder, and C. J. Gilbert, "Fracture,
Fatigue and Environmentally-Assisted Failure of Zr-Based Bulk Amorphous
Metal", Journal of Intermetallics, vol. 8 (5-6), 2000, pp. 469-475.
-
A. L. McKelvey, K. T. Venkateswara Rao, and R. O. Ritchie,
"High-Temperature Fracture and Fatigue-Crack Growth Behavior of an XD Gamma-Based
Titanium Aluminide Intermetallic Alloy," Metallurgical and Materials
Transactions A, vol. 31A (5), May 2000, pp. 1413-1423.
-
J. O. Peters, O. Roder, B. L. Boyce, A. W. Thompson, and
R. O. Ritchie, "Role of Foreign Object Damage on Thresholds for High-Cycle
Fatigue in Ti-6Al-4V", Metallurgical and Materials Transactions A,
vol. 31A (6), June 2000, pp. 1571-1583.
-
D. Chen, C. J. Gilbert, X. F. Zhang, and R. O. Ritchie, "High-Temperature
Cyclic Fatigue-Crack Growth Behavior in an In Situ Toughened Silicon
Carbide Ceramic", Acta Materialia, vol. 48 (3), Feb. 2000, pp. 659-674.
-
A. Tatschl, C. J. Gilbert, V. Schroeder, R. Pippan, and R.
O. Ritchie, "Stereo-Photogrammetric Investigation of Overload and Cyclic
Fatigue Fracture Surface Morphologies in a Zr-Ti-Ni-Cu-Be Bulk Metallic
Glass", Journal of Materials Research, vol. 15 (4), April 2000,
pp. 898-903.
-
D. Chen, C. J. Gilbert, and R. O. Ritchie, "On the In
Situ Measurement of Crack-Growth Rates during Fatigue-Crack Propagation
in Silicon Carbide Ceramics at Elevated Temperatures", ASTM Journal
of Testing and Evaluation, vol. 28 (4), July 2000, pp. 236-241.
-
D. Chen, X. F. Zhang, and R. O. Ritchie, "Effects of Grain-Boundary
Structure on the Strength, Toughness and Cyclic Fatigue Properties of a
Monolithic Silicon Carbide", Journal of the American Ceramic Society,
vol. 85 (8), August 2000, pp. 2079-2081.
-
J. O. Peters and R. O. Ritchie, "Influence of Foreign Object
Damage on Crack Initiation and Early Fatigue-Crack Growth in Ti-6Al-4V",
Engineering
Fracture Mechanics, vol. 67 (3), Oct. 2000, pp. 193-207.
-
J. P. Campbell and R. O. Ritchie, "Mixed-Mode, High-Cycle
Fatigue-Crack Growth Thresholds in Ti-6Al-4V: Part I – A Comparison of
Large and Small Crack Behavior", Engineering Fracture Mechanics,
vol. 67 (3), Oct. 2000, pp. 209-227.
-
J. P. Campbell and R. O. Ritchie, "Mixed-Mode, High-Cycle
Fatigue-Crack Growth Thresholds in Ti-6Al-4V: Part II – Quantification
of Crack-Tip Shielding", Engineering Fracture Mechanics, vol. 67
(3), Oct. 2000, pp. 229-249.
-
D. Chen, M. E. Sixta, X. F. Zhang, L. C. De Jonghe, and R.
O. Ritchie, "Role of the Grain-Boundary Phase on the Elevated-Temperature
Strength, Toughness, Fatigue and Creep Resistance of Silicon Carbide Sintered
with Al, B and C", Acta Materialia, vol. 48 (18/19), Dec. 2000,
pp. 4599-4608.
-
B. Asoo, J. M. McNaney, Y. Mitamura, and R. O. Ritchie, "Cyclic
Fatigue-Crack Propagation in Sapphire in Air and Simulated Physiological
Environments", Journal of Biomedical Materials Research, vol. 52,
2000, pp. 488-491.
-
D. Chen, X.-F. Zhang, and R. O. Ritchie, "Mechanisms of High-Temperature
Fatigue and Fracture in Silicon Carbide Ceramics", in Fatigue and Fracture
Behavior of High Temperature Materials, P. K. Liaw and M. Huang, eds.,
TMS, Warrendale, PA, 2000, pp. 1-8.
-
H. Choe, D. Chen, J. Schneibel, and R. O. Ritchie, "Fracture
and Fatigue-Crack Growth Behavior in Mo-12Si-8.5B Intermetallics at Ambient
and Elevated Temperatures", in Fatigue and Fracture Behavior of High
Temperature Materials, P. K. Liaw and M. Huang, eds., TMS, Warrendale,
PA, 2000, pp. 17-24.
-
K. Shirato, D. Chen, M. W. Barsoum, T. El-Raghy, and R. O.
Ritchie, "High-Temperature Cyclic Fatigue-Crack Growth in Monolithic Ti3SiC2
Ceramics", in Fatigue and Fracture Behavior of High Temperature Materials,
P. K. Liaw and M. Huang, eds., TMS, Warrendale, PA, 2000, pp. 71-75.
-
B. L. Boyce and R. O. Ritchie, "Effect of Load Ratio and
Maximum Stress Intensity on the Fatigue Threshold in Ti-6Al-4V", Engineering
Fracture Mechanics, vol. 68, 2001, pp. 129-147.
-
R. O. Ritchie and J. O. Peters, "Small Fatigue Cracks: Mechanics,
Mechanisms and Engineering Applications", Materials Transactions,
vol. 42 (1), 2001, pp. 58-67.
-
V. V. Panasyuk, O. Ye Andreykiv, R. O. Ritchie, and O. I.
Darchuk, "Estimation of the Effects of Plasticity and Resulting Crack Closure
during Small Fatigue-Crack Growth", International Journal of Fracture,
vol. 107 (2), 2001, pp. 99-115.
-
J. P. Campbell and R. O. Ritchie, "High-Cycle Fatigue in
Bimodal and Lamellar Ti-6Al-4V: Mixed-Mode Crack-Growth Thresholds", Metallurgical
and Materials Transactions A, vol. 32A (3), March 2001, pp. 497-503.
-
A. L. McKelvey and R. O. Ritchie, "Fatigue-Crack Growth Behavior
in the Superelastic and Shape-Memory Material Nitinol", Metallurgical
and Materials Transactions A, vol. 32A (3A), Mid March 2001, pp. 731-743.
-
Yoon Soo Han, Do Kyung Kim, C. J. Gilbert, and R. O. Ritchie,
"Cyclic Fatigue-Crack Propagation in Silicon Carbide: Long- and Small-Crack
Behavior", Journal of the American Ceramic Society, vol. 84 (3),
March 2001, pp. 551-554.
-
B. G. Demczyk, J. Cumings, A. Zettl, and R. O. Ritchie, "Structure
of Boron Nitride Nanotubes", Applied Physics Letters, vol. 78 (18),
April 30, 2001, pp. 2772-2774.
-
T. L. Becker, Jr., R. M. Cannon, and R. O. Ritchie, "Finite
Crack Kinking and T-Stresses in Functionally Graded Materials",
International
Journal of Solids and Structures, vol. 38 (32-33), Aug. 2001, pp. 5545-5563.
-
H. Choe, D. Chen, J. H. Schneibel, and R. O. Ritchie, "Ambient
to High Temperature Fracture and Fatigue-Crack Propagation in a Mo-12Si-8.5B
Intermetallic", Journal of Intermetallics, vol. 9 (4), 2001, pp.
319-329.
-
J. O. Peters, B. L. Boyce, X. Chen, J. M. McNaney, J. W.
Hutchinson, and R. O. Ritchie, "Role of Residual Stresses on High-Cycle
Fatigue of Impact-Damaged Ti-6Al-4V: Surface vs. Subsurface Crack Initiation",
in Proceedings of the International Conference on Fatigue in the Very
High Cycle Regime, S. E. Stanzl-Tschegg and H. M. Mayer, eds., BOKU,
Vienna, Austria, 2001, pp. 129-140.
-
B. L. Boyce, X. Chen, J. W. Hutchinson, and R. O. Ritchie,
"The Residual Stress State due to a Spherical Hard-Body Impact", Mechanics
of Materials, vol. 33 (8), Aug. 2001, pp. 441-454.
-
V. Schroeder, C. J. Gilbert, and R. O. Ritchie, "A Comparison
of the Mechanisms of Fatigue-Crack Propagation Behavior in a Zr-Based Bulk
Amorphous Metal in Air and an Aqueous Chloride Solution", Materials
Science and Engineering A, vol. A317, Oct. 2001, pp. 145-152.
-
C. L. Muhlstein, S. B. Brown and R. O. Ritchie, "High-Cycle
Fatigue and Durability of Polycrystalline Silicon Thin Films in Ambient
Air", Journal of Sensors and Actuators, Sept. 2001.
-
C. L. Muhlstein, S. Brown and R. O. Ritchie, "High-Cycle
Fatigue of Single Crystal Silicon Thin Films", Journal of Microelectromechanical
Systems, Dec. 2001.
-
D. Chen, K. Shirato, M. W. Barsoum, T. El-Raghy, and R. O.
Ritchie, "Cyclic Fatigue-Crack Growth and Fracture Properties in Ti3SiC2
Ceramics at Elevated Temperatures", Journal of the American Ceramic
Society, vol. 84 (11), Nov. 2001.
-
C. L. Muhlstein, S. B. Brown and R. O. Ritchie, "High-Cycle
Fatigue of Polycrystalline Silicon Thin Films in Laboratory Air", in
Materials Science of Microelectromechanical Systems (MEMS) Devices III,
MRS
Symposium Proceedings, M. deBoer, M. Judy, H. Kahn, and S. M. Spearing,
eds., vol. 657, Materials Research Society, Pittsburgh, PA, 2001, pp. EE5.8.1-6.
-
J. J. Kruzic, J. M. McNaney, R. M. Cannon, and R. O. Ritchie,
"Time-Dependent Debonding of Aluminum-Alumina Interfaces under Cyclic and
Static Loading", in Structure-Property Relationships of Oxide Surfaces
and Interfaces, MRS Symposium Proceedings, C. B. Carter, X.
Pan, K. Sickafus, H. L. Tuller, and T. Wood, eds., vol. 654, Materials
Research Society, Pittsburgh, PA, 2001.
-
R. K. Nalla, J. P. Campbell, and R. O. Ritchie, "Mixed-Mode
High-Cycle Fatigue Thresholds in Ti-6Al-4V: A Comparison of Large and Small
Crack Behavior" in Proceedings of the Sixth International Conference
on Biaxial/Multiaxial Fatigue and Fracture, Lisbon, Portugal, M. de
Freitas, ed., 2001.
-
W. Cheng, I. Finnie, and R. O. Ritchie, "Residual Stress
Measurement on Pyrolytic Carbon-Coated Graphite Leaflets for Cardiac Valve
Prostheses", Proceedings of the 2001 SEM Annual Conference, Portland,
OR, Society for Experimental Mechanics, Bethel, CN, 2001.