|
3. Key / Mouse
Tray & Arms
|
Features/Options
|
Image
|
Applications
|
|
3a. Workrite Ultrathin
“Straight” Combo Kit
Model
#186
Source:
E-Buy
Pacific Safety & Supply
Search
WKR215522
|
-
Includes platform and armature
-
28” wide x 11.5” deep platform
-
Rectangular design for straight work
surface or “L” configuration
-
Includes 22" deep track length for 24” plus
Surface depths
-
Independent palm rest at keyboard/mouse
|
Complete Arm &
Platform
|
-
Straight tray works best on straight surface
Or “L” configured stations
-
Extra WIDE tray allows room for larger
Keyboards and mice, mouse tablets as well as
detached numeric pads
|
|
3b. Workrite Ultrathin Platform
“Corner”
Model
# 188
Source:
E-Buy
Pacific Safety & Supply
Search:
WKRUB18825
|
-
28” wide x 11.5” deep platform
-
Notched to fit Steelcase 9000 corner
-
Must specify 17" or 22" track length
depending on available surface depth
-
Use Swivel Plate in difficult corner and "L"
configurations to add more flexibility of
keyboard tray positioning
|
Must
order arm separately
|
-
Notched corners allow tray to fit tight 17” diagonal
corners so tray can be raised flush with surface
-
Single level tray provides ultimate flexibility for
right/left mouse use and a variety of input
device sizes to ensure the mouse position is
close to body centerline
|
|
3c. WorkRite Ultrathin
Platform “Straight” Splitpad
Model
# 486
Source:
E-Buy
Pacific Safety & Supply
Search: WKRUB48625
|
-
28” wide x 11.5” deep platform
-
Rectangular design for straight work
surface or “L” configuration
-
Must specify 17" or 22" track length
Depending on available surface depth
-
Independent palm rest at keyboard/mouse
|
Must order arm separately
|
- Straight tray works
best on straight surface
Or “L” configured stations
-
Extra WIDE tray allows room for larger
Keyboards and mice, mouse tablets as well as
detached numeric pads
|
|
3d. WorkRite Ultrathin Platform
“Straight Compact” Splitpad Model # 482
Source:
E-Buy
Pacific Safety & Supply
Search:
WKRUB48225
|
-
25” wide x 11.5” deep platform
-
Compact for short keyboard and mouse
close together to reduce reach
-
Rectangular design for straight work
surface
or “L” configuration
-
Independent palm rest at keyboard/ mouse
|
Must order arm separately
|
-
Straight tray works best on straight surface
Or “L” configured stations
-
Extra SHORT tray allows you to bring mouse
close to body centerline when using short
keyboards or keyboards without numeric pads
-
Arm adjusts from near flush with surface to 6" below
|
|
 3e. Workrite Pinnacle Arm
Model # 3170
Source:
E-Buy
Pacific Safety & Supply
Search:
WKR317022TG
|
-
Arm adjusts from flush with surface to 6
below
-
Must specify 17" or 22" track length
depending
on available surface depth
|
Must also order platform
|
-
Good for smaller person or taller persons who must
use or prefer to key/mouse at lower height
-
22” track fits on most /all corner and straight surfaces
as shallow as 24” deep. Use 17” track for shallower
surfaces
|
|
3f. Workrite Pinnacle Arm
“Extended”
Model
#3172
Source:
E-Buy
Pacific Safety & Supply
Search: WKR317222TG
|
-
Arm adjusts from flush with surface to 8"
below and extends farther forward to clear
tight
corners
-
Must specify 17" or 22" track length
depending
on available surface depth
|
Must also order platfrom
|
-
Good for smaller person or taller persons who must
use or prefers to key/mouse at lower height
-
This provides 2” greater height range than standard
Pinnacle Arm and extends out a little further to clear
tight corner surfaces
-
22” track fits on most corner and straight surfaces as
shallow as 24” deep. Use 17” track for shallower
surfaces
|
|
3g. Workrite Revo KBM
Platform & Arm with Mouse-Over Feature Model # 2100-25J
Source:
E-Buy
Pacific Safety & Supply
Search:
WKR222722
|
-
Combination 2-part keyboard/mouse
platform and lift armature
-
Includes independent mouse platform with
mouse-over feature
|
|
- Good for
smaller person/short-armed person to align
mouse closer to body centerline when other
alternatives don’t work, i.e., shorter keyboard,
keyboard without num pad or for persons who
discrete periods of mouse input and discrete periods
of 10-key input
|
|
3h. Humanscale Diagonal Big
Board
(replacement
platform only) Model # 400
Source: E-Pro Requisition One
Workplace
Contact
Una Hopkins (510) 263-4108
|
-
Large Keyboard/mouse platform with
notched corners
-
Fits keyboard and mouse on single platform
-
Designed to fit at corner diagonal work
surface
-
Measures 27 1/2" w x 11 1/2" d
|
|
- Good for
replacing 2-part Humanscale Keyboard tray
with separate mouse tray to bring mouse
closer to person’s body centerline
- Use on corner diagonal surfaces
- Good for alternating right and left hand mousing
- Assumes the
person has existing Humanscale
adjustable arm. If not, use Workrite Key/Mouse
platform and arms
|
|
3i. Humanscale Big Board
(replacement
platform only) Model # 500
Source: E-Pro Requisition One
Workplace
Contact
Una Hopkins (510) 263-4108
|
-
Large Keyboard/mouse platform
-
Designed to fit on straight work surface
-
Measures 27 " wide x 10.5" deep
|
|
- Good for
replacing 2-part Humanscale keyboard tray
with separate mouse tray to bring mouse closer to
person’s body centerline
- Good for alternating right and left hand mousing
- Use on straight surfaces and L configurations
- Assumes the
person has existing Humanscale
adjustable arm. If not, use Workrite Key/Mouse
platform and arms
|
|
3j. SpaceCo Sit-Stand Cobra
Arm with
Notched
Corner Platform Model # OP50CB
Source: E-Pro Requisition One
Workplace
Contact
Una Hopkins (510) 263-4108
|
-
Extended height keyboard arm with
notched corner diagonal tray
-
Adjusts 5” below and 5” above work surface
|
|
-
Used on an exception basis for people’s whose seated
elbow height is higher than the work surface
-
Can also be used for person’s who must sit very high
(stool height) due to seated mobility problems…can’t
get in out of chair when seat is low
-
Can be used for person’s who want to alternate
between sit and stand at workstation. In such cases,
LCD screen should be on adjust height armature to
move input and display in synch.
|
